xenon climate aging test chamber
488005.0 INR/Unit
Product Details:
X
xenon climate aging test chamber Price And Quantity
- 1 Unit
- 488005.0 INR/Unit
xenon climate aging test chamber Trade Information
- Cash in Advance (CID)
- 100 Unit Per Month
- 5 Days
- All India
Product Description
Standard Features
| Model | DR-H301 |
| Internal dimension (WxDxH) | 500*600*500mm |
| External dimension (WxDxH) | 1000*1000*1750mm |
| Temperature range | RT+10~ 60 (suggest to use 402) |
| Temperature Fluctuation | 1 |
| Ozone concentration | 50~1000 pphm, adjustable |
| Ozone concentration deviation | 10% |
| Sample holder | SUS#304 stainless steel |
| Temperature controller | Programmable touch screen controller |
| Ozone concentration analysis | Concentration analysis meter |
| Ozone generator | High pressure silence discharge type |
| Protection system | Leakage, short circuit, over temperature, over heat |
| Test criteria | ASTM D1149, ISO 1431, JIS K6259... |
Xenon lamp climate aging test chamber is a device used to simulate climate conditions such as light, temperature, humidity, and rainfall in natural environments, in order to accelerate the aging of materials and products. The following will provide a detailed introduction to its performance characteristics, main accessories, and ordering process.
1 Performance characteristics
one
Spectral simulation:
High precision solar spectrum matching: The spectrum emitted by the xenon lamp highly matches the natural solar spectrum, and can simulate the effects of ultraviolet (UV), visible light, and infrared (IR) irradiation.
Spectral adjustability: Some advanced models of test chambers can adjust spectral distribution to simulate sunlight in different geographical locations and seasons.
two
Light intensity control:
Adjustable irradiance: The test chamber can accurately control the intensity of light, usually expressed in irradiance (W/m ), to simulate sunlight at different time periods and weather conditions.
Light uniformity: Ensure uniform distribution of light within the testing area to provide consistent testing conditions.
three
Humidity control:
Wide humidity range: The humidity range is usually 20% to 98%, which can simulate various environmental conditions from dry to high humidity.
High precision humidity control: Ensure that the humidity remains stable during the testing process to avoid the impact of humidity fluctuations on the test results.
four
Rainfall simulation:
Adjustable sprinkler system: equipped with a water sprinkler system, it can simulate the impact of rainwater on materials, including special environments such as acid rain.
Flexible spraying cycle: The spraying cycle and duration can be set to simulate different rainfall conditions.
five
Loop testing function:
Programmable cyclic testing: Different cyclic testing programs can be set up to simulate the aging process of materials under different time periods and climatic conditions.
Automated operation: Some advanced models of test chambers support automated operation and can automatically adjust various parameters according to preset programs.
six
Security protection measures:
Multiple safety protections: The equipment is equipped with multiple safety protection devices, such as over temperature protection, overload protection, leakage protection, etc., to ensure the safety of the equipment and operators.
seven
Easy to operate and maintain:
User friendly interface: The design of the test chamber is simple and intuitive, easy to operate, and usually equipped with a touch screen interface or intelligent control system.
Easy maintenance: Daily maintenance is simple, and some models are also equipped with automatic cleaning and calibration functions.
2 Main accessories
one
Xenon lamp tube:
Function: Provide lighting that highly matches the solar spectrum.
Features: High brightness, long lifespan, typically with a lifespan of 1500 to 2000 hours.
two
Temperature and humidity sensors:
Function: Real time monitoring and control of temperature and humidity inside the test chamber.
Features: High precision, fast response.
three
Spray system:
Function: Simulate rainfall and sprinkler conditions.
Features: Adjustable spray cycle and intensity.
four
Control system:
Function: Control parameters such as lighting, temperature, humidity, and spraying.
Features: High precision temperature and humidity control and lighting control, usually equipped with touch screen interface or intelligent control system.
five
Safety protection device:
Function: Provides over temperature protection, overload protection, leakage protection, etc.
Features: Multiple protections ensure the safety of equipment and operators.
six
Cooling system:
Function: Control the temperature inside the test chamber, usually using water or air cooling methods.
Features: Efficient cooling capacity ensures stable operation of the test chamber under high loads.
seven
Sample rack:
Function: Place and secure test samples.
Features: Adjustable design to accommodate samples of different shapes and sizes.
eight
Data recording and analysis software:
Function: Record various data during the testing process and provide data analysis tools.
Features: User friendly interface, convenient for data export and analysis.
3 Ordering process
one
Requirement analysis:
Determine testing requirements: specify the types of materials that need to be tested, testing standards, testing cycles, etc.
Choose the appropriate model: Select the appropriate xenon lamp climate aging test chamber model according to the testing requirements.
two
Inquiry and quotation:
Contact the supplier: Contact the supplier of the xenon lamp climate aging test chamber through phone, email, or online platform.
Obtain quotation: Provide detailed testing requirements and equipment specifications to obtain supplier quotations.
three
Technical consultation and selection:
Technical consultation: Communicate with technical personnel from suppliers to obtain professional selection recommendations.
Confirm the model and configuration: Based on the technical consultation results, confirm the final selected test chamber model and configuration.
four
Sign the contract:
Negotiate contract terms: including price, delivery time, payment method, warranty terms, etc.
Signing the contract: After both parties confirm the terms of the contract, a formal contract is signed.
five
Manufacturing and Quality Inspection:
Production and manufacturing: Suppliers carry out production and manufacturing according to contract requirements.
Quality inspection: After production is completed, a comprehensive quality inspection is conducted to ensure that the equipment meets the standards.
six
Shipping and installation:
Shipping: Arrange logistics to transport the equipment to the customer's designated location.
Installation and commissioning: The supplier dispatches technical personnel to install and commission the equipment to ensure its normal operation.
seven
Training and usage guidance:
Operation training: Provide training to customer operators, explaining the usage methods and precautions of the equipment.
Provide user manual: Provide detailed user manual and technical information.
eight
after-sale service:
Warranty service: Provide warranty service according to the contract to ensure the normal operation of the equipment.
Technical support: Provide long-term technical support and consulting services.
Tell us about your requirement
Price:
Quantity
Select Unit
- 50
- 100
- 200
- 250
- 500
- 1000+
Additional detail
Mobile number
Email
Other Products in 'Environment Test Chamber' category
Contact Details
- 1st Floor, No. 3, Shugang Avenue, Hongmei Town,Dongguan Guangdong, China
- Mr. Shirley (Manager)
- Mobile : +8615580327593
- Send Inquiry
-
Derui Testing Equipment Co., Ltd
Send Inquiry
Derui Testing Equipment Co. Ltd
All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.
Developed and Managed by Infocom Network Private Limited.
English
Spanish
French
German
Italian
Chinese (Simplified)
Japanese
Korean
Arabic
Portuguese